Home » Articles posted by Vera McGee

Author Archives: Vera McGee

How Roofers Repair Common Problems

Roofers West Chester PA are licensed and insured to protect themselves and homeowners from costly mistakes. Homeowners who try to repair large areas of damage may void their roof warranty.

Roofers typically charge by the square, which is a 10-foot-by-10-foot roof area. The price goes up if the roof has multiple levels and features.

roofers

Your roof protects you from the elements, but even a small damaged shingle weakens this defense and opens up your home to moisture infiltration. A simple shingle repair can prevent major storm damage and costly roof replacement, but you have to act fast—as soon as you spot the damage.

Fortunately, most damage to shingles isn’t hard to see, although some issues may require a close inspection to detect. For example, heat and UV rays can cause shingles to develop blisters, which appear as bubbled areas on the shingle. If left untreated, these blisters can rupture and allow water to leak through your roof.

Shingles can also deform, causing them to lose their structural integrity. This can be due to a number of factors, including foot traffic or misnailing during installation. In other cases, it might be due to aging or weather conditions. Fortunately, a roofer can fix deformed shingles and return them to their original condition.

Aside from missing shingles, one of the most common problems to watch out for is damaged shingles that have a curled edge or cracked surface. In some cases, a small crack or hole will be visible beneath the shingle, but in other cases the shingle will look like it has been crushed from the wind.

Often, the first step in repairing these issues is to loosen the nails that hold the damaged shingle in place. If you have the right tools, you can replace these shingles yourself. You’ll need a hammer, a flat pry bar and a utility knife, as well as a handful of new shingles.

Begin by sliding the pry bar under the shingle immediately above the damaged one and gently lifting it to break the sealer strip connection and expose the first row of nails. Gently lift the shingle until it is free, then remove all of the nails (it may take 30 minutes or more to remove just one shingle).

Now that the old shingle has been removed, slide a new shingle into its place, starting at the top of the damaged area and working your way down. Be sure to line up the new shingle with its neighbors, making sure it overlaps properly. If you’re not comfortable working on your roof, it might be best to leave this type of roofing job to the pros.

Flashing is a sheet of metal that runs along the intersections of your roof and walls. It prevents rain and snow from leaking into those areas. It also blocks cracks and crevices so water can’t penetrate them. Flashing is important, especially in regions with a lot of rain and snow. Without it, your roof would leak into your attic space and the walls of your home.

Even if your roof was installed correctly by a professional, you can have flashing issues if inclement weather or storms damage it. For example, powerful winds can pull flashing away from the roof. Or, a chimney that’s not properly sealed can leak into the house.

Normal wear and tear can cause flashing problems, too. For instance, EPDM rubber can get brittle over time and break down. That’s why it’s a good idea to have your roof inspected every year, or more frequently, depending on the age of your home and your climate.

Other causes of flashing problems include a faulty installation, dramatic temperature changes, and a settling foundation. When a flashing isn’t securely attached to the shingles, or it’s warped from drastic temperature changes, it can’t direct water where it needs to go during a rainstorm.

Flashing repairs usually involve replacing the rusty or damaged section with new metal. It may also involve removing and replacing the shingle that the flashing is attached to. A roofer will typically replace the shingle underneath it, as well, to prevent further water intrusion.

One foolproof way to identify a flashing leak is to have someone climb a ladder and use a garden hose to gently soak the roof in the area where you think a leak is occurring. If the person inside your attic can see evidence of water infiltration when the hose is running, then you need to have the flashing repaired. If you try this, be sure to take extreme caution on a ladder and never go up there alone. Make sure you have a spotter to watch for falling debris and help you out if needed.

A deck is a great place for relaxing, having backyard barbecues and gathering with friends and family. But if it’s damaged, it can quickly turn from an enjoyable feature to a dangerous accident waiting to happen. Luckily, many types of deck damage can be repaired with some effort and money.

Wood rot is one of the most common deck problems. It’s easy to spot, as boards become textbook spongy when poked with a screwdriver or other hard object. Wood rot can be repaired with a little work and some wood filler, according to Everyday Home Repair. It’s a good idea to use a wood filler that includes fungicide, as this will help prevent future rot and mold.

Another common deck problem is loose railings. Loose railings are not only a safety hazard, but they can also easily fall off during a storm. Loose railings are especially problematic along steps and stairs, as they can cause someone to trip or lose their balance. This type of damage is usually easy to fix, and it’s a good idea to do so sooner rather than later.

Decks can also be damaged by sun and wind, which cause warping, buckling, splitting and cracking. Check your deck for these issues on a regular basis, and make any necessary repairs before the damage worsens.

If a board is significantly rotten, damaged or soft, it’s likely time to replace it with new lumber. Look for other signs of serious structural damage, including rusty hardware, severe shifting or movement in the framing or joists, and sinking footers. If the damage is widespread, it may be best to demolish the entire deck and rebuild it with new materials.

Keeping your deck clean and staining it regularly can help keep it looking and functioning well. If you notice surface mold, fungus, or other discoloration, remove the affected area and sand it down before staining. Be sure to use a high-quality stain that contains a fungicide, and follow the manufacturer’s instructions on application. A quality stain will help protect your deck from the elements and extend its life, so don’t skip this important step!

Roof underlayment is a vital component of your home that provides an extra layer of protection in the event of damage to the deck or shingles. It’s not indestructible, however, and it’s important to keep an eye out for signs of underlayment damage to ensure the continued strength and safety of your roof.

One clear sign that your underlayment is damaged is if you notice water stains on your ceilings and walls during or after rainstorms. These stains are caused by water infiltrating your home through the underlayment and can lead to mold and mildew growth. They can also cause damage to your insulation and other structural components.

Another common sign of underlayment damage is if you notice damp or musty odors in your home. These odors are caused by the microorganisms that thrive in moist environments, such as mold and mildew. They can also indicate a leak in the roof, which should be fixed immediately to avoid further damage.

Lastly, a sudden increase in your energy bills could be an indication that your underlayment is in need of replacement. When underlayment is damaged, it allows air to escape the home, which can raise heating and cooling costs. A roofing contractor can inspect the underlayment and determine if it needs to be replaced.

Whether your underlayment is made from felt paper, ice shields, it’s important to have regular roof maintenance so that roofing professionals can inspect the condition of your underlayment and replace it if necessary. Certain materials, such as felt, are more susceptible to UV exposure, which can cause it to break down and deteriorate. , on the other hand, is designed to be resistant to extreme temperatures and can protect your roof from UV damage.

Types of Roofing

Roofing protects the structural integrity of a building, prevents mold and rot, and keeps interiors warm and dry. A well-insulated roof also helps reduce strain on heating and cooling systems, resulting in energy savings.

Roofing

A roof is supported by rafters or trusses that are cut on-site or pre-fabricated in factories and craned into place. It’s covered with sheathing – typically felt or plywood.

Shingles are a crucial part of the overall roof system, and they protect a home from wind, rain, sun, and snow. They are designed in an overlapping pattern to provide complete protection for the material beneath them, such as plywood or a vapor barrier. They also add an element of beauty to your home’s exterior.

Most homes in America use asphalt shingles, which are the most common roofing materials. The shingle itself is a fiberglass mat coated with an asphaltic compound that resists weather and fire damage. This base is then covered with a variety of mineral granules, which give the shingle its color and texture. Different granules are used for specific purposes: algae-resistant granules help inhibit discoloration from blue-green algae; reflective granules reflect more of the sun’s heat energy.

The granules are usually colored using a chemical process, but some shingles have colored granules embedded that don’t require chemicals or heating. This gives the shingles an extra element of design and reduces the cost.

Before the shingles are sold, they have to go through a series of quality control tests. The manufacturer must ensure that the shingle is made of the right materials and that it has the proper ratings to be installed on a roof. These ratings are determined by testing labs like Underwriters Laboratories or the American Society for Testing and Materials. The shingles are also tested for durability and resistance to high winds.

Once the shingle passes all of its tests, it can be produced in different styles and colors. Popular styles include three-tab shingles and architectural shingles. Three-tab shingles have cutouts that look like individual shingles, while architectural shingles are thicker and less uniform for a textured appearance.

If you are considering a new roof, I recommend hiring a professional who specializes in your particular type of roofing. This will ensure that the installation is done properly, and it will be covered by a warranty. Also, a roofing professional will know how to recognize problems and issues that can’t be seen from the ground.

Some types of roofing, such as wood and slate, require specialized knowledge to install properly and avoid problems with leaking or other structural issues. These should be left to professionals who have apprenticed in the trade and have a great deal of experience with these systems.

Tiles

Tiles are a type of wall and floor covering that come in a wide range of sizes, colors and textures. They are commonly made from hard materials like marble, clay and slate but can also be soft such as wool, cork and recycled paper. Tiles are primarily used in interior spaces but can be found on the exterior of buildings too. They can be glazed or unglazed depending on the desired look and are available in various styles to suit all budgets and tastes.

There are many different types of tiles for roofs, some are specialized to specific climates and others have unique designs that add beauty to the home. Some of the most common include clay tiles, concrete tiles, terra cotta and slate. Each has its own strengths and weaknesses. Clay tiles, often referred to as Spanish tile roofs, are great for warm climates and can be shaped to curve around the house. They can crack when exposed to freezing or thawing temperatures though, so they are not recommended for colder climates. Concrete tiles are more durable but can be quite heavy.

Slate roofs, on the other hand, are considered a luxury item and offer an elegant, classic appearance. They are also very durable and come in a variety of colors and textures. Slate is a metamorphic rock that was also used by ancient civilizations for their roofs. These are very high-quality tiles and therefore very expensive.

Other roofing tiles are made from other natural materials, such as granite and marble. These can be very beautiful but are more difficult to work with than clay or concrete tiles. Because of their irregular shape, they are harder to install correctly and require more maintenance. Some stone tiles are sawn on both sides and polished on the top surface while others are riven, meaning they are left as they are naturally found in nature. They are easier to work with than mass-produced clay or concrete tiles but still require more planning and preparation for use and installation.

Another option for roofs is to use concrete tiles, which are molded with a mixture of sand, cement and water. The concrete is then pressed under heat and pressure to create the tile. These can be made in a flat style that has no curve, or in low and high profile shapes. The concrete can also be painted to mimic other types of roofing, such as wood shake, slate or stone tiles.

Slate

Slate is a natural, sedimentary rock that’s been used as a roofing material for centuries. It has many advantages over other types of roofing materials, including its durability and beauty. It’s also fireproof and an effective insulator, and it can last for up to 200 years. However, slate can be expensive and requires specialized installation techniques.

Slate roofing is typically made from several different layers of thin, smooth stones that are overlapped to form a solid, watertight surface. These stones may come in a variety of colors and shapes, and they can be cut to size with a slating machine. This allows the roof to be customized to each home. The roof can be designed with multiple pitches, and the eaves may have a smaller or larger pitch than the main part of the roof.

While slate can look beautiful on a roof, it’s not suitable for every house. It is very heavy and requires a strong, stable structure to support it. It can also be slippery, which can make it dangerous to walk on. It’s also brittle, which can cause damage if someone falls off the roof.

Slate is a fine-grained, foliated metamorphic rock that forms through low-grade regional metamorphism of shale or mudstone. It is a popular roofing material for its durability and beauty, and it has been used for other purposes, such as exterior pavers, billiard tables, and blackboards. The word “slate” may also refer to a small piece of this rock, often framed in wood and used with chalk as a writing slate for recording charges in pubs and inns.

Slate is usually gray in color, but it can be found in a wide range of colors, even within a single quarry. It may also contain micas, chlorite, calcite, feldspar, and pyrite. Slate roofing is very durable and long-lasting, but it can be prone to damage from hail and other environmental factors. It is not recommended for homes with steep slopes because it can be difficult to keep water flowing off the roof and into gutters. It is also prone to cracking from frost damage.

Clay

Whether you’re looking for a new roof, or simply want to update the look of your home, clay is a beautiful option. It’s long-lasting and durable and can stand up to harsh weather conditions like high winds and hail, which would be damaging to other roofing materials. Clay tiles also offer an earthy color and design that adds character to your home and can be shaped in many different ways.

Clay is a type of soil, which consists of finely divided particles of weathered minerals from rocks and sediments. It is often found in areas where rivers or streams flowed, bringing in minerals, plant and animal remains, and organic matter. Over time, water pressure breaks up these remains and pulverizes them into tiny pieces. These particles form a sticky paste known as clay when moist.

When clay is dried and fired, it becomes hard and brittle. It is a very important material, and the use of clays has been documented worldwide since prehistoric times. Clays are used for ceramics, building construction, fireclay, and a number of other applications. They are found in all geologic environments and can be layered with other minerals and organics, such as coal or peat, to produce pottery ware.

Because of their structure and density, clay tiles can withstand extremely high wind speeds. In fact, they can handle a Class 4 impact rating and are resistant to other outside factors such as rot, fungus, insects and even fire. In addition, they are highly energy efficient and have a low absorption rate of less than 1%, making them the perfect choice for cold climates.

Despite their popularity and wide-ranging uses, clays are rarely characterized by objective criteria. Most datasheets simply list the chemical properties (porosity, soluble salts, fired shrinkage) without giving any quantifiable values such as plasticity or particle size. This is because the chemistry of clays is complicated and involves multiple parameters. However, it is possible to quantify the plasticity of clays by using a simple technique based on the bending deformation of small cylindrical specimens. This method can provide a quantitative baseline value to distinguish between clays and other less plastic materials.

Bathroom Remodels For Blastist Homes

Milwaukee Bathroom Remodeling can add value to your home and save you money in the long run by improving efficiency with new fixtures. If you’re considering a remodel, you should establish your budget first.

bathroom remodeling

You can perform some of the work depending on your skill set. However, it would be best if you also considered hiring a contractor to help with the larger projects like plumbing and electrical.

Concrete gets a bad rap as it is cold and uninviting, but when done right, this material can make a stunning backdrop for your bathroom. From floors and walls to sculptural sinks, the rough texture of concrete plays beautifully with brutalist design. Customizing concrete with pigment to play with color and consistency in your space is also easy.

Concrete is an ideal material for brutalist designs because of its ability to withstand heavy use while maintaining a polished look. This rugged material is perfect for homes with strong geometric lines and a bold presence, like this desert retreat designed by Marc Thorpe Design. Exposed concrete walls enclose the home’s interior and create strong visual ties to the landscape. Still, expansive glass openings on both the north and south sides improve solar gain and allow natural cross ventilation.

Another way to add a touch of warmth to a harshly minimalistic concrete home is to use wood accents. These can be used in alcove shelving to hold towels and bath products, or as the vanity countertop your quality bathware sits on. The natural wood also complements the sandy beige and lush greens characteristic of Brutalism, further bringing the exterior and interior spaces together.

Brutalism was first popular during the post-World War II era when builders sought cost-effective materials to withstand tough use. Concrete was widely available during this time and became the preferred material for residential structures. As a result, brutalist architects used concrete to create eye-catching designs emphasizing structure and form.

Even modern concrete houses can be adapted to fit the brutalist style. This example from Belgium was built near the end of the movement in 1974 and strayed slightly from some of the strictest Brutalist principles. Its simple stepped style and gray concrete exterior blend in with the surrounding wooded area, while a concrete sculptural entryway welcomes guests.

While the brutalist design aesthetic might not be everyone’s cup of tea, this polarising style does have several benefits. For one, it breaks free of traditional norms to create a minimalistic and functional space that is also fiercely modern. It is important to incorporate a variety of textures and colors into the home. This will add interest, soften the harshness of the concrete build, and provide a contrasting palette for other elements in the room.

A common feature in brutalist interiors is a need for more furniture, but this can be false. Instead, incorporating functional design features such as a storage niche or concrete half wall in the bedroom can serve as the space’s focal point while still serving a purpose and giving the room an interesting shape. This 4-room resale flat exemplifies this idea by using the concrete walls as a backdrop for decorative vases and a headboard.

Brutalism often has a monochromatic color palette, but this doesn’t mean other colors can’t be incorporated into the design. Various earthy shades help balance the starkness of the concrete build and give the home more personality. In this condo, swaths of green in the garden and kitchen make their way inside, creating a harmonious contrast against the grey of the concrete walls.

One of the most difficult aspects of Brutalism is ensuring that the design isn’t too harsh or impersonal. This is especially true in the bathroom, where a simple design can quickly become sterile and clinical. This Dawson Condo home successfully achieves this by combining sleek modern surfaces with eye-catching textures, such as the rattan TV console and plush leather sofa. This gives the house a warmth that counteracts the brutalist design features such as raw concrete walls and dark wooden cabinetry.

Brutalism can be a challenging design style, but the results can be stunning. You can turn your brutalist home into a contemporary work of art with the right combination of concrete, contrasting colors, and eye-catching textures.

It’s no secret that cleaning your bathroom can feel like a chore, and it’s even more of a hassle when your space is full of grout lines where dirt and grime collect. When you remodel your brutalist home, choose elements that reduce the time spent scrubbing and scouring your bathroom. For example, replacing tile with a solid surface such as quartz or marble eliminates crevices where mold can grow. You can also choose back-painted glass as an aesthetic element to minimize lines where water spots and dust can build.

Using a neutral palette is the best way to introduce color into your brutalist bathroom. This approach softens the space’s industrial look, allowing other design elements to shine. White vanities and simple silver plumbing fixtures in this minimalist bathroom create a clean and polished look. Adding natural textures, like the woven rattan vanity stool and boucle wall hanging, adds an eye-catching contrast to the neutral palette.

The Brutalist trend hasn’t been everyone’s cup of tea, but it can be an excellent source of inspiration. When you’re ready to take a risk in your home, consider the brutalist style an opportunity to showcase your creative personality and bold taste.

If you’re ready to give your brutalist home a fresh look, contact us today to discuss your remodeling project. We’ll help you determine the best elements to incorporate into your space to ensure your project succeeds. We’ll never share your information with anyone, and you can unsubscribe anytime.

While not typically the first design feature that comes to mind when considering a bathroom remodel, natural light is essential. It brings a bright and clean look to any space while also providing a natural source of warmth that can help keep a room comfortable in colder environments. Additionally, sunlight can be used as a supplement to other lighting options to provide more even illumination throughout a space.

Maximizing the amount of natural light that a bathroom receives can be done in various ways, depending on the layout and style of the space. For example, if a toilet is large enough to accommodate it, installing an oversized window can effectively bring a lot of natural light into a room. For smaller spaces, using a skylight can be an excellent option.

Glass shower doors can also be a great way to let in more natural light. A lot of these types of glass doors can be frosted for privacy purposes, as well as to control the amount of light that is let in. For bathrooms that cannot accommodate windows or skylights, using a large mirror can effectively reflect light and make a room feel larger.

Whether you’re interested in adding more grit to your bathroom or looking for a simple design that makes your space feel larger, Brutalism is an easy style to incorporate into any bathroom. Just be sure to consider the layout of your bathroom before making any big remodeling changes so that you can ensure the best possible results.